Diamond Coated Carbide 6mm End Mills Long Flute Squares For Graphite

Solid Tungsten Carbide d6 Long Flute Squares End Mills For Graphite

Chip control, surface finish, tool life, and the machine tool’s power and torque requirements. One of the commonly used Diamond coated End Mills for general milling. Due to the space limitations, we provide the following tables showing most popular Cnway’s diamond coated End Mills only for general turning of steel, cast iron, and nonferrous alloys. These tables don’t cover all Cnway chip breakers.

Advantages:

1: imported raw powder materials,

2: have a peculiar gradient cobalt-rich on surface of the substrates which can ensure the inserts’ high performance when finishing the CVD coating.

3: The thickness of coating materials are about 14μm, which have high abrasion resistance. After special management on the surface of the coating end mills, the internal stress and surface of coating were reduced while cutting resistance was also cut down.

4: Our G series grade can cutting graphite from finish machining, to semi-finish and rough machining.

Tips: The above specifications are standard Size, with a large amount of stock. At the same time, we support OEM customized production, the diameter is 0.2mm to 25mm, the Total length is 50mm to 200mm, the different flutr length, include inch size end mill , the number of Flute is 4F, 5F, 6F, 8F and the logo could becustomized.